HLQ/STM SLIDE TABLE AIR CYLINDER ALUMINUM TUBING
Usoro STM
| NO | d | E | X | T | D | H | B | C | S |
| 1 | Φ10 | 44 | 16 | 17 | 8 | 10 | 8 | 1.5 | 18 |
| 2 | Φ16 | 59 | 22 | 23 | 11 | 13 | 14 | 1.5 | 30 |
| 3 | Φ20 | 68 | 25 | 26 | 13 | 16 | 17 | 1.5 | 35 |
| 4 | Φ25 | 82 | 31 | 32 | 16 | 18 | 15 | 5 | 40 |
HLQ (φ6-25) Series Slide table Cylinder Tube
| NO | 2-d1 | A | B | C | D | E | F | G |
| 1 | φ6 | 30.6 | 17.4 | - | 5.2 | 12 | 11.5 | 10.9 |
| 2 | φ8 | 40.6 | 24 | - | 5.4 | 17 | 14.1 | 13.5 |
| 3 | φ12 | 50.8 | 28 | 12 | 6 | 20 | 19.4 | 18.5 |
| 4 | φ16 | 60.8 | 38.6 | 15.4 | 6 | 24 | 24.3 | 23.3 |
| 5 | φ20 | 70.8 | 44 | 20 | 6 | 32 | 29.6 | 28.8 |
| 6 | φ25 | 84.8 | 55 | 29 | 8 | 42 | 35.8 | 34.9 |
Ihe nke Aluminom Alloy Profile Aluminom pneumatic cylinder tube: aluminum alloy 6063 T5
Ogologo ọkọlọtọ anyị bụ 2000mm, ọ bụrụ na achọrọ ogologo ọzọ, biko gwa anyị n'efu.
Anodized elu: N'ime tube-15 ± 5μm mpụga tube-10± 5μm
Nkwekọrịta iji chepụta FESTO, SMC, Airtac, Chelic wdg.
Dị ka ọkọlọtọ ISO 6430 ISO6431 VDMA 24562 ISO15552 wdg.
Eji maka ọkọlọtọ ọkọlọtọ, kọmpat cylinder, mini cylinder, Dual Rod cylinder, Slide cylinder, Slide Table cylinder, Gripper etc. Ọzọkwa maka ụfọdụ cylinders pụrụ iche.
Ngwakọta kemịkalụ:
| Ngwakọta kemịkalụ | Mg | Si | Fe | Cu | Mn | Cr | Zn | Ti |
| 0.81 | 0.41 | 0.23 | <0.08 | <0.08 | <0.04 | <0.02 | <0.05 |
Nkọwapụta:
| Ọgba aghara (N/mm2) | Ike Mpụta (N/mm2) | Ọdịmma (%) | Isi ike | Izi ezi dayameta dị n'ime | Ime ime | Izi ezi | Mperi ọkpụrụkpụ |
| Nkeji 157 | S 0.2 108 | S8 | HV 300 | H9-H11 | <0.6 | 1/1000 | ± 1% |
Mfe nke Aluminom Alloy Tube:
| ỊKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊ ALUMINUM | ||||||
| Nha nha | NKWUKWU | |||||
| mm | H9(mm) | H10 (mm) | H11(mm) | |||
| 16 | 0.043 | 0.07 | 0.11 | |||
| 20 | 0,052 | 0.084 | 0.13 | |||
| 25 | 0,052 | 0.084 | 0.13 | |||
| 32 | 0.062 | 0.1 | 0.16 | |||
| 40 | 0.062 | 0.1 | 0.16 | |||
| 50 | 0.062 | 0.1 | 0.16 | |||
| 63 | 0.074 | 0.12 | 0.19 | |||
| 70 | 0.074 | 0.12 | 0.19 | |||
| 80 | 0.074 | 0.12 | 0.19 | |||
| 100 | 0,087 | 0.14 | 0.22 | |||
| 125 | 0.1 | 0.16 | 0.25 | |||
| 160 | 0.1 | 0.16 | 0.25 | |||
| 200 | 0.115 | 0.185 | 0.29 | |||
| 250 | 0.115 | 0.185 | 0.29 | |||
| 320 | 0.14 | 0.23 | 0.36 | |||
Ajụjụ:
Q1: Kedu ụdị okpokoro sliding Pneumatic cylinders dị?
A: Model nwere MXS na STM pneumatic cylinder
Q2: Gịnị bụ slide table Pneumatic cylinder?
A: Tebụl na-amị amị Pneumatic Cylinder: Tebụl sliding pneumatic bụ usoro draịva linear nke a na-ejikarị na ụlọ ọrụ akpaaka.A na-eji ya eme ihe n'ọtụtụ ebe na akụrụngwa igwe, akụrụngwa akpaaka na robots.A na-ebutekarị ya site na ikuku mkpakọ, yana mmegharị ahịrị nke ihe mmịfe ahụ na-enweta site na nfefe bọọlụ ziri ezi na okporo ụzọ slide linear.
Q3: Enwere uru ọ bụla?
A:
1 Ngwakọta kọmpat nke tebụl sliding Pneumatic Cylinder work table na Pneumatic Cylinder;
2. Pneumatic Cylinder ziri ezi kwesịrị ekwesị maka tebụl na-amị amị pneumatic maka mgbakọ ziri ezi;
3. Oke siri ike / oke dị elu, ngwaọrụ strok na-agbanwe agbanwe (0-5mm);
4. The sliding table Pneumatic Cylinder adopts cross ball ndu, nke nwere obere esemokwu na ike na-aghọta ezigbo ije na-enweghị looseness;
5. Nchikota nke Pneumatic Cylinder na worktable na-ebelata mkpokọta nha;
6. A na-anabata usoro Cylinder okpukpu abụọ-Pneumatic iji nweta ike mmepụta ugboro abụọ;
7. Ụdị mgbanaka magnetik arụnyere, enwere ike itinye mgbanaka magnetik.
8. A na-ejikarị pneumatic sliding table pneumatic Pneumatic Cylinder dị ka njem na njem nke ngwa ngwa, na izi ezi dị elu.
Q4: Gịnị bụ nha nha maka MXS?
A: The mụụrụ size nwere Dia 6mm, Dia 8mm, Dia12mm, Dia16mm, Dia20mm
