SC / MAL Ikuku Cylinder Tube Bore 16mm - 320mm Round Aluminum Tubing Barrel
Kacha nkịtị pneumatic cylinder aluminum alloy gburugburu pneumatic cylinder tube, akụrụngwa bụ 6063-T5 alloy.Aluminom alloys nwere ezigbo nguzogide corrosion, formability na weldability.Mgbidi dị n'ime na nke dị n'èzí bụ anodized, ma nwee echiche dị mma
Nkọwapụta (mm):
| ID | OD | Okpokoro | ID | OD | Okpokoro |
| 16 | 20 | 2 | 90 | 96.8 | 3.4 |
| 20 | 25 | 2.5 | 100 | 105 | 2.5 |
| 25 | 30 | 2.5 | 100 | 106 | 3 |
| 32 | 37 | 2.5 | 100 | 106.8 | 3.4 |
| 40 | 43.8 | 1.9 | 100 | 109.8 | 4.9 |
| 40 | 45 | 2.5 | 110 | 117 | 3.5 |
| 50 | 53.8 | 1.9 | 125 | 131 | 3 |
| 50 | 55 | 2.5 | 125 | 132 | 3.5 |
| 50 | 58 | 4 | 125 | 132.8 | 3.9 |
| 63 | 67.2 | 2.1 | 125 | 135 | 5 |
| 63 | 68 | 2.5 | 140 | 150 | 5 |
| 63 | 69 | 3 | 160 | 167 | 3.5 |
| 70 | 76 | 3 | 160 | 170 | 5 |
| 75 | 79.8 | 2.4 | 180 | 190 | 5 |
| 75 | 81 | 3 | 200 | 208.4 | 4.2 |
| 80 | 84.4 | 2.2 | 200 | 210 | 5 |
| 80 | 85 | 2.5 | 250 | 262 | 6 |
| 80 | 86 | 3 | 300 | 312 | 6 |
| 80 | 86.8 | 3.4 | 320 | 336 | 8 |
| 85 | 92.4 | 3.7 |
|
|
|
Ihe nke Aluminom Alloy Profile Aluminom pneumatic cylinder tube: aluminum alloy 6063 T5
Ogologo ọkọlọtọ anyị bụ 2000mm, ọ bụrụ na achọrọ ogologo ọzọ, biko gwa anyị n'efu.
Anodized elu: N'ime tube-15 ± 5μm mpụga tube-10± 5μm
Nkwekọrịta iji chepụta FESTO, SMC, Airtac, Chelic wdg.
Dị ka ọkọlọtọ ISO 6430 ISO6431 VDMA 24562 ISO15552 wdg.
Eji maka ọkọlọtọ ọkọlọtọ, kọmpat cylinder, mini cylinder, Dual Rod cylinder, Slide cylinder, Slide Table cylinder, Gripper etc. Ọzọkwa maka ụfọdụ cylinders pụrụ iche.
Ngwakọta kemịkalụ:
| Ngwakọta kemịkalụ | Mg | Si | Fe | Cu | Mn | Cr | Zn | Ti |
| 0.81 | 0.41 | 0.23 | <0.08 | <0.08 | <0.04 | <0.02 | <0.05 |
Nkọwapụta:
| Ọgba aghara (N/mm2) | Ike Mpụta (N/mm2) | Ọdịmma (%) | Isi ike | Izi ezi dayameta dị n'ime | Ime ime | Izi ezi | Mperi ọkpụrụkpụ |
| Nkeji 157 | S 0.2 108 | S8 | HV 300 | H9-H11 | <0.6 | 1/1000 | ± 1% |
Mfe nke Aluminom Alloy Tube:
| ỊKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊ ALUMINUM | ||||||
| Nha nha | NKWUKWU | |||||
| mm | H9(mm) | H10 (mm) | H11(mm) | |||
| 16 | 0.043 | 0.07 | 0.11 | |||
| 20 | 0,052 | 0.084 | 0.13 | |||
| 25 | 0,052 | 0.084 | 0.13 | |||
| 32 | 0.062 | 0.1 | 0.16 | |||
| 40 | 0.062 | 0.1 | 0.16 | |||
| 50 | 0.062 | 0.1 | 0.16 | |||
| 63 | 0.074 | 0.12 | 0.19 | |||
| 70 | 0.074 | 0.12 | 0.19 | |||
| 80 | 0.074 | 0.12 | 0.19 | |||
| 100 | 0,087 | 0.14 | 0.22 | |||
| 125 | 0.1 | 0.16 | 0.25 | |||
| 160 | 0.1 | 0.16 | 0.25 | |||
| 200 | 0.115 | 0.185 | 0.29 | |||
| 250 | 0.115 | 0.185 | 0.29 | |||
| 320 | 0.14 | 0.23 | 0.36 | |||
FAQ
Q1: Gịnị bụ 6063 aluminum alloy
A: Isi alloying ọcha bụ magnesium na silicon, nke nwere magburu onwe nhazi Njirimara, magburu onwe weldability, extrudability na electroplating Njirimara, ezi corrosion eguzogide, siri ike, mfe polishing, agba film, na magburu onwe anodizing mmetụta, nke na-ahụkarị Extruded alloy.
A na-eji profaịlụ alloy 6063 aluminom mee ihe na profaịlụ ụlọ, ọkpọkọ ogbugba mmiri, ụgbọ ala, oche, arịa ụlọ n'ihi ezigbo plasticity ha, ike ọgwụgwọ okpomọkụ na-agafeghị oke, arụmọrụ ịgbado ọkụ dị mma, na agba elu mara mma mgbe ọgwụgwọ anodizing gasịrị.Tubes, mkpanaka na profaịlụ ejiri mee ihe, igwe mbuli elu, ngere, wdg.
Q2: kedu ihe kacha ibu na nha nha kacha nta
A: The kasị mụụrụ size nke SC aluminum alloy cylinder anodized aluminum tube bụ IDφ320MM.The kacha nta mụụrụ size nke SC cylinder ikuku cylinder aluminum tubing bụ IDφ16MM.
Q3: Ị nwere ike ịnye samples maka ule
A: Anyị dị nnọọ njikere ịnye gị ihe nlele anyị, anyị kwadebere ihe nlele zuru ezu maka ndị ahịa anyị ịnwale
Q4: Anyị nwere ike hazie tubing aluminom cylinder honed dị ka eserese ndị ahịa nyere?
A: Anyị nwere ike imeghe ebu dị ka ndị ahịa chọrọ, na anyị nwere ọtụtụ ụdị nke tubes na-mere dị ka ndị ahịa chọrọ.
Q5: Nkọwa ọkọlọtọ nke ngwaahịa gị ọ dị na ngwaahịa?
A: Anyị nwere niile ot ụdị na ngwaahịa, na anyị nwere a factory ụlọ dị ka ụlọ nkwakọba ihe
Q6: Gịnị mere Autoair nwere uru na-eri?
A: Profaịlụ anyị niile na-agbapụta na ụlọ ọrụ nke anyị, a na-emekwa nhazi nke tubes pneumatic cylinder nke aluminom na ụlọ ọrụ nke anyị, na-enweghị ụgwọ ụgbọ njem etiti.
Q7: Gịnị kpatara oge nnyefe Autoair ji dị ngwa ngwa?
A: N'ihi na anyị nwere ebuka nke ọtụtụ ụdị aluminum pneumatic cylinder aluminum profaịlụ, anyị ụlọ nkwakọba ihe nwere ebe nke 1,000 square mita, na e nwere zuru ezu ebuka nke ot ụdị aluminum pneumatic cylinder barrels.
Q8: Gịnị bụ SC pneumatic cylinder?
A: Ọ bụ Airtac ọkọlọtọ nlereanya, Ọ bụkwa otu n'ime ndị kasị eji cylinders.N'ihi usoro nrụpụta dị mfe na ọnụ ahịa mmepụta dị ala, ọ na-ewu ewu na ndị na-azụ ahịa n'ahịa.
Q9: Enwere MOQ ọ bụla?
A: Anyị enweghị MOQ maka SC pneumatic cylinder, ị nwere ike ịhọrọ nke ọ bụla.
Q10: Gịnị bụ ogologo nke SC aluminum profaịlụ tube gị?
A: The ọkọlọtọ size nke anyị SC cylinder tube bụ 2.2M, ụfọdụ nha nwere ike họrọ ogologo 2.4M
Q11: Gịnị bụ nkwakọ?
A: N'ozuzu, anyị na-akwakọba site osisi ikpe.Ọ bụ zere mmebi nke tube.
Anyị kwesịrị ijide n'aka na ngwongwo ahụ rutere gị ebe ahụ yana ezigbo ọnọdụ.
Q12: Ụlọ ọrụ gị ọ nwere akụrụngwa anodizing nke ya?
A: Ee, anyị factory nwere abụọ pneumatic cylinder tube anodizing akụrụngwa, anyị pneumatic cylinder tube n'ime na elu mgbidi na-ma anodized.
Q13: Ị nwere aluminom extrusion akụrụngwa na gị factory
A: Ee, Ụlọ ọrụ anyị nwere ihe abụọ dị arọ nke aluminom extrusion ngwá ọrụ, nke nwere ike extrude pneumatic cylinder aluminum profaịlụ na aluminum mmanya, na nwekwara ike imeghe ebu na extrude profaịlụ dị ka ndị ahịa chọrọ.
