304 316 Honed Pneumatic Cylinder igwe anaghị agba nchara tube, igwe anaghị agba nchara.
Nkọwapụta
| Nha | Nkọwapụta | |||||||
| ID | Nkwenye | OD | Nkwenye | Ọkpụrụkpụ | Gburugburu | Izi ezi | N'ime elu imecha | |
| φ6xφ7 | 6 | 0.04/0 | 7 | ±0.05 | 0.5 | 0.03 | 1.5mm/m | Ra ≤0.4μm |
| nke 8x9 | 8 | 0.04/0 | 9 | ±0.05 | 0.5 | 0.03 | 1.5mm/m | Ra ≤0.4μm |
| φ10xφ11 | 10 | 0.04/0 | 11 | ±0.05 | 0.5 | 0.03 | 1.2mm/m | Ra ≤0.4μm |
| φ10xφ11.25 | 10 | 0.04/0 | 11.25 | ±0.05 | 0.63 | 0.03 | 1.2mm/m | Ra ≤0.4μm |
| 10xφ11.8 | 10 | 0.07/0 | 11.8 | ±0.1 | 0.9 | 0.03 | 1mm/m | Ra ≤0.4μm |
| 11.8xφ13.8 | 11.8 | 0.07/0 | 13.8 | ±0.1 | 1 | 0.03 | 1mm/m | Ra ≤0.4μm |
| 12xφ13.4 | 12 | 0.05/0 | 13.4 | ±0.05 | 0.7 | 0.03 | 1.2mm/m | Ra ≤0.4μm |
| φ14.3xφ16.3 | 14.3 | 0.07/0 | 16.3 | ±0.1 | 1 | 0.03 | 1mm/m | Ra ≤0.4μm |
| φ16xφ17.4 | 16 | 0.05/0 | 17.4 | ±0.05 | 0.7 | 0.03 | 1mm/m | Ra ≤0.4μm |
| φ20xφ21.4 | 20 | 0.06/0 | 21.4 | ±0.05 | 0.7 | 0.04 | 1mm/m | Ra ≤0.4μm |
| φ25xφ26.4 | 25 | 0.06/0 | 26.4 | ±0.05 | 0.7 | 0.04 | 1mm/m | Ra ≤0.4μm |
| φ32xφ33.6 | 32 | 0.07/0 | 33.6 | ±0.05 | 0.8 | 0.05 | 1mm/m | Ra ≤0.4μm |
| φ40xφ41.6 | 40 | 0.07/0 | 41.6 | ±0.05 | 0.8 | 0.05 | 1mm/m | Ra ≤0.4μm |
| φ50xφ52 | 50 | 0.06/0 | 52 | ±0.07 | 1 | 0.05 | 1mm/m | Ra ≤0.4μm |
| φ63xφ65 | 63 | 0.06/0 | 65 | ±0.07 | 1 | 0.05 | 1mm/m | Ra ≤0.4μm |
| φ16xφ18 | 16 | 0.05/0 | 18 | ±0.05 | 1 | 0.03 | 1mm/m | Ra ≤0.4μm |
| φ20xφ22.8 | 20 | 0.06/0 | 22.8 | ±0.05 | 1.4 | 0.04 | 1mm/m | Ra ≤0.4μm |
| φ25xφ27.8 | 25 | 0.06/0 | 27.8 | ±0.05 | 1.4 | 0.04 | 1mm/m | Ra ≤0.4μm |
| φ32xφ35 | 32 | 0.07/0 | 35 | ±0.05 | 1.5 | 0.05 | 1mm/m | Ra ≤0.4μm |
| φ40xφ43 | 40 | 0.07/0 | 43 | ±0.05 | 1.5 | 0.05 | 1mm/m | Ra ≤0.4μm |
Ọkpụkpọ igwe anaghị agba nchara bụ oghere gbara okirikiri ogologo, nke a na-ejikarị na mmanụ ala, kemịkalụ, ahụike, nri, ụlọ ọrụ ọkụ, igwe na akụrụngwa na pipeline ụgbọ njem ụlọ ọrụ ndị ọzọ na akụkụ arụ ọrụ.Ke adianade do, mgbe ekwe na torsion ike bụ otu ihe ahụ, arọ bụ Mkpa ọkụ, n'ihi ya, ọ na-eji ọtụtụ ebe na-emepụta nke n'ibu akụkụ na engineering owuwu.A na-ejikarị ya eme ihe dị ka ngwá ụlọ na arịa kichin.
Anyị nwere 2 ụdị igwe anaghị agba nchara Pneumatic Cylinder tube, nke bụ 316L ọkwa na 304 akara ule.
Ajụjụ:
Q1: Gịnị bụ ihe dị iche maka 304 Grade na 316 Grade?
A:
| akara ule | C max | Mn max | P max | S max | Si max | Cr | Ni | Mo |
| 304 | 0.08 | 2 | 0.04 | 0.03 | 0,075 | 18.00-20.00 | 8.00-11.00 | / |
| 316 | 0.8 | 2 | 0.04 | 0.03 | 0,075 | 16.00-18.00 | 11.00-14.00 |
Q2: Gịnị bụ ihe dị iche maka 304, 304L, 316, 316L?
A:
| Ihe eji arụ ọrụ | |||||
| akara ule | Ihe | Psi tensile | Mpụta Psi | Ogologo% | Rockwell Hardness |
| 304 | Annealed | 85000-105000 | 35000-75000 | 20-55 | 80-95 |
| 304L | AnnealedI1/8 siri ike | 85000-105000 | 35000-75000 | 20-55 | 75-95 |
| 316 | Annealed | 85000min | 35000min | Nkeji 50 | 80min |
| 316L | Annealed | 80000min | 30000min | Nkeji 50 | Nkeji 75 |
| akara ule | C max | Mn max | P max | S max | Si max | Cr | Ni | Mo |
| 304 | 0.08 | 2 | 0.04 | 0.03 | 0,075 | 18.00-20.00 | 8.00-11.00 | / |
| 304L | 0,035 | 2 | 0.04 | 0.03 | 0,075 | 18.00-20.00 | 8.00-13.00 | / |
| 316 | 0.08 | 2 | 0.04 | 0.03 | 0,075 | 16.00-18.00 | 11.00-14.00 | 2.00-3.00 |
| 316L | 0,035 | 2 | 0.04 | 0.03 | 0,075 | 16.00-18.00 | 10.00-15.00 | 2.00-3.00 |
Q3: Kedu ihe mkpuchi pneumatic kwesịrị ka ejiri igwe anaghị agba nchara pneumatic cylinder tubes
A: MA, DSNU Pneumatic cylinder na igwe anaghị agba nchara cylinder tube.
Q4: Ị nwere igwe anaghị agba nchara pneumatic cylinder zuru ezu?
A: Ee, anyị nwere.Ọ bụ ngwaahịa ahaziri ahazi.Na mkpokọta, a na-eji ya dabara adaba maka ọkwa nri ma ọ bụ iji ọgwụ eme ihe.Ọ bụrụ na onye ahịa nwere oke zuru oke, a na-anabata anyị iziga anyị ajụjụ.
Q5: Ọ bụrụ na anyị ịtụ igwe anaghị agba nchara pneumatic cylinder tube, a piston mkpanaka na igwe anaghị agba nchara?
A: Ee, mkpanaka piston nwere igwe anaghị agba nchara 304.
